Outdoor sensor with plastic housing

Best.-Nr. 010.7987

Outside temperature sensors are the ideal solution for the HVAC sector and allow cost-effective temperature measurement. The robust, impact-resistant housing enables use both outdoors and indoors. The sensor is installed using straight screws on straight surfaces (wall area).
The sensor finds its main areas of application wherever precise temperature detection in weather-dependent areas is concerned, e.g. in industrial, agricultural, cold and greenhouses as well as in production and storage halls and in building automation.
The housing meets the NEMA 4X / IP65 requirements.
The sensor is mounted on the circuit board in the housing.
Passive temperature output signal: Pt1000

Technical specifications:
Electrical connection: spring-type terminal plug-in max. 2.5 mm²
Cable entry: cable gland with strain relief Ø6 … 8 mm
Passive temperature output signal: Pt1000
Application: air
Measured values: temperature
Measuring range temperature: -35 … 50 ° C [-30 … 120 ° F]
Passive temperature accuracy: Pt ..: Class B, ± 0.3 ° C @ 0 ° C [± 0.5 ° F @ 32 ° F]
Cable gland: PA6, white
Mounting plate: Lexan, gray RAL7001
Housing: cover: Lexan, white; Below: Lexan, white; Seal: 0467 NBR70, black; UV-resistant
Ambient humidity: max. 95% r.H., non-condensing
Ambient temperature: -35 … 50 ° C [-30 … 120 ° F]
Medium temperature: -35 … 50 ° C [-30 … 120 ° F]
Housing surface temperature: Max. 90 ° C [195 ° F]
Protection class IEC / EN: III safety extra low voltage (SELV)
Protection class UL: UL Class 2 Supply
EU conformity: CE marking
IEC / EN certification: IEC / EN 60730-1
UL certification: cULus acc. to UL60730-1A / -2-9, CAN / CSA E60730-1: 02 / -2-9
Degree of protection IEC / EN: IP65
Degree of protection NEMA / UL: NEMA 4X
Quality standard: ISO 9001

Scope of delivery: Outside temperature sensor with plastic housing (white), dowels and screws.

Dimensions (HxWxD): 113.3x65x50

Downloads & Links