0/1/Auto hand control unit 230V, DIN rail

Best.-Nr. 300.16282

This manual control unit can also be used to switch the outputs of the PLC or the controller OFF or ON. In the AUTO position, the output of the PLC is switched through to the output of the manual control unit. This module ensures that the system can continue to run in manual mode even if the PLC fails.

Hand control unit with housing and plug-in relay in the 230VAC version.

Contact Rating: 250VAC AC1 8A
Coil voltage: 230VAC

Dimensions: 22x100x48mm (WxHxD)

Downloads & Links